Trident Marine: Wet Exhaust Hose

U.S.: 1-800-414-BOAT
Intl.: 724-745-9311

NEW Ultimate quality Silicone Marine Exhaust & Water hose. #202V Blue Very Hi Temp. [4 to 6 ply polyester reinforcement 350°F (177°C)] & #202X Red Xtra Hi Temp [4 ply Nomex® reinforcement 500°F (260°C)] dramatically exceeds all standards and lasts up to 6 times longer than black rubber. (SAE J2006, ABYC and NMMA) Stds.** (see below).
See Marine Wet Exhaust Systems Catalog. ISO 13363 Std. Pending.
10 YEAR WARRANTY

1" to 18" 25 to 457mm	Blue or Red w/ White Stripe
I.D.: 1" (25mm) to 8-5/8" (219mm) Lengths: 6' (1.8m) & 12' (3.65m) ALL: 3' (0.91m)

Trident Blue Corra-Sil Marine Wet Exhaust & Water Hose (SAE J2006)

#252v
NEW Ultimate quality Silicone Marine Exhaust & Water hose. #252V Blue Very Hi Temp. [4 to 6 ply polyester reinforcement 350°F (177°C)] dramatically exceeds all standards and lasts up to 6 times longer than black rubber. (SAE J2006, ABYC and NMMA) Stds.** (see below).
See Marine Wet Exhaust Systems Catalog. ISO 13363 Std. Pending.
10 YEAR WARRANTY

3/4" to 18"
19mm to 457mm

Blue

I.D.: 1" (25mm) to 8-5/8" (219mm)

Coils: 60' (18.28m)
Lengths: 6' (1.8m) & 12' (3.65m)
ALL: 3' (0.91m)

Premium corrugated marine wet exhaust hose for longer connections with substantial bends. Thick tube and cover with helix between 2 ply reinforcement. Exceptional flexibility and bend radius. Resists heat, ozone, exhaust fumes, panting and collapse. Exceeds New (SAE J2006, ABYC and NMMA) Stds.** (see below). Black High Temp EDPM Rubber 250°F (121°C). ISO 13363 Std. Pending.
5 YEAR WARRANTY

1-1/2" to 10" 38 to 254mm	Black w/ Blue Stripe
I.D.: 1" (25mm) to 4" (102mm) Coils: 50' (15m) Lengths: 12.5' (3.8m) & 6.5' (1.9m)

Premium wet exhaust hose for longer bent connections. In smaller I.D.'s for engine intake, critical water, drain, scupper bilge & sanitation uses. Extra heavy tube and cover with helix between 2 ply reinforcement provides excellent flexibility and bend radius. Resists heat, ozone, exhaust, sani chemicals, panting and collapse. Exceeds New (SAE J2006, ABYC and NMMA) Stds.** (see below). Black High Temp EDPM Rubber 250°F (121°C). ISO 13363 Std. Pending.
5 YEAR WARRANTY

1/2" to 10" 13mm to 254mm	Black w/ Blue Stripe
I.D.: 1/2" (13mm) to 4" (102mm) Coils: 50' (15m) Lengths: 12.5' (3.8m) & 6.5' (1.9m)

Premium marine wet exhaust hose for short, straight connections. In smaller I.D.'s for critical engine coolant & circulation, heat exchanger and discharge uses. Extra heavy tube and cover with 2 to 6 ply reinforcement resists heat, aging, ozone, exhaust and sani chemicals. Exceeds New (SAE J2006, ABYC and NMMA) Stds.** (see below). Black High Temp EDPM Rubber 250°F (121°C). ISO 13363 Std. Pending.
5 YEAR WARRANTY

1/2" to 10" 13mm to 254mm	Black w/ Blue Stripe
I.D.: 1/2" (13mm) to 2.5" (63.5mm) Coils: 50' (15m) Lengths: 12.5' (3.8m) & 6.5' (1.9m)

131V Ultimate Silicone Heater Hose- Very Hi Temp Blue with Red Tube provides much greater temperature range and service life (up to 6 times longer) than standard EDPM rubber #130 Heater Hose. Both are 2 spiral polyester reinforced with similiar working pressure for engine coolant water, A/C and other mid-pressure water applications. #131V (VHT-Blue): 45 to 75PSI (0.31 to 0.52Mpa) WP 350°F (177°C) SAE J20R3, Class 1 & J20P3. 7 Year Warranty.
#130 (Standard Black): 50PSI (0.34Mpa) WP 212°F (100°C) SAE J20R3. 2 Year Warranty.

Blue(131V): 1/4" to 1" 6.3 to 25mm Black(130): 1/2" to 3/4" 13 to 19mm	Blue Cover w/ Red Tube Black w/ Yellow Letters
Blue(131V): 300' (90m) to 175' (53m) Coils 50' (15m) to 25' (7.6m) Boxes Black(130): 500' (150m) - 450' (140m) Reels 50' (15m) Boxed

Cost effective, Hi Temp, EPDM rubber, polyester reinforced and exceeds SAE J20R3. Both are resistant to coolants, ozone, cold & heat; and serve a variety of boat and plant pressurized applications (water & air delivery).
#132: 2 spiral, 200PSI (1.38Mpa) WP.
#134: 4 spiral, heavy wall and better bend radius and working pressure - 300PSI (2.1Mpa) WP. Operating temperature -40° to 212°F (-40° to 100°C). #134 serves below water line intake and discharge applications (A/C, Eng, Sani) etc.
2-3 YEAR WARRANTY

1/4" to 1" 6.3mm to 25mm	Black w/ White Letters
Reels: 750' (230m) to 250' (75m) Boxed: 50' (15m)

**Wet exhaust hose connections: recommend double clamping with stainless steel T-bolt or Constant-Torque clamps. Nomex® is a trademark of e.i DuPont.

Wet Exhaust

Marine Hose | LP Gas | Wet Exhaust | Purchasing | Marine Standards