Trident Marine: LPG Regulators

U.S.: 1-800-414-BOAT
Intl.: 724-745-9311

The regulator reduces the tank pressure (avg. 100 PSI) to less than 0.5 PSI. It connects to the tank valve (directly or via a pigtail hose) with it? swivel male POL (LHT) fitting. All marine regulators have a 300 PSI gauge on their high pressure (tank) side, to conduct frequent system leak testing as per ABYC A1 Standard.
learn more about LP gas basics

Assembly Option Diagrams:

#1 in diagrams

The most compact low pressure regulator that meets ABYC marine standard with gauge for required LPG System Leak Test. It is fully assembled and leak tested with solid brass: male POL cylinder fitting, street tee & 300 psi gauge (low profile, water tight, stainless steel); and UL Listed die cast zinc body with 3/8 FPT outlet.

#2 in diagrams

UL Listed, die cast body with 3/8" FPT outlet is fully assembled with 300PSI leak test gauge (low profile, water tight, stainless steel) and mounting brackets. Connect pigtail hose (item #1014-1415-20 or #1014-1401-20) to regulator inlet, and to one or more cylinders (one at a time). By mounting on wall this low pressure regulator saves space in LPG Locker, especially when adding a solenoid valve, manifold, gas grill connection tee, etc. 100% Leak Tested - Meets ABYC Marine LPG Standard.

#3 in diagrams

Meet ABYC Marine Standard for required LPG System Leak Test by installing this between LPG cylinder valve and Regulator or Pigtail Hose without gauge. Fully assembled and leak tested with solid brass male POL cylinder fitting, female POL receptacle block, and 300 PSI Gauge (low profile, water tight, stainless steel).

#4 in diagrams

For use with two cylinders. UL Listed body is assembled and leak tested with two 300PSI leak test gauges, wall mounting brackets, and 3/8" FPT Outlet. Connect 2 pigtail hoses to regulator inlets and to cylinders. Regulates cylinder pressure more efficiently than 1 stage regulator. With both cylinder valves open it automatically changes over to full cylinder when 1st selected cylinder is empty. Indicator dome shows orange until selector switch is pushed fully towards full cylinder. Then empty tank can be disconnected for refill. Meets ABYC Marine Standard.

#5 in diagrams

Pre-drilled to attach to underside of all our regulators for mounting remote from cylinder onto flat surface within LPG Locker. Packaged in sets of 2 with 4 self tapping screws. #1250-0000 (stainless steel model)

#6 in diagrams

Fits all our regulators. Use when they are exposed to weather. White PVC.

LP Gas

Marine Hose | LP Gas | Wet Exhaust | Purchasing | Marine Standards

nbsp;