Easily converts gas grill
from small disposable bottles to larger refillable
cylinders in boats built in LPG System. Install
connection kit between the outlet of regulator
(or low pressure solenoid if used) and LPG supply
line to built in appliance. This low pressure
installation provides additional safety of less
than 1/2 PSI in hose to gas grill, and must be
used with a low pressure control valve atthe gas
grill that is recommended by its manufacturer.
The kit is fully assembled and leak tested with
solid brass: tee, ball valve and adapters; and
a 10 foot, UL Listed, high pressure LPG hose with
3/8" female swivel flare fittings each end.
G-265 is kit w/o hose, buy any length LPG hose
desired.
Easily converts gas grill
or other portable LPG appliances from small disposable
bottle to larger refillable cylinder. Perfect for
boat (without built in LPG system), camping, picnic,
etc. Fully assembled and leak tested with hand wheel
POL cylinder fitting; H.P. appliance valve fitting
(1" 20 swivel male with "0" ring
& check valve); and 6' or 12' high pressure
LPG hose.
A 6' or 12' high pressure
LPG hose fully assembled& leak tested with solid
brass swivel fitting (1" 20 female for tee
connection) x (1" 20 male with "O"
ring & check valve for H.P. appliance connection).
Use with (19) or (20) H.P. Gas Grill Adapter Tees.
Available separately or as High Pressure Gas Grill
Connection Kit (G-415-72) with (18a) 6' hose &
(19) H.P. Gas Grill Connection Tee.
A special high pressure
tee to be installed betweenc ylinder valve and Regulator
or Pigtail POL fitting. Fully assembled and leak
tested with solid brass: swivel male POL x female
POL receptacle x 1" 20 male fitting with "O"
ring & check valve withc aptive safety cap.
Must use with (18) H.P. Gas Grill Conversion Hoses.
